LS Tractors MT357 2

SERIES



The MT4 features a variety of configurations enabling you to find the exact configuration you need.  A ROPS and Cab version are available with highly featured operator platforms/cabs.  The ergonomic design provides all-day comfort, as the robust frame provides high-capacity front loader and three point lift.

dumbbell iconLOADER LIFT CAPACITY 2,981 lbs. tractor iconHITCH LIFT 4,079 lbs.
lightning iconENGINE HP 58.0 HP tractor wheel iconPTO HP 51.2 HP

 

Brochure LS Model Comparison Competitive Comparison Get Pre-Approved

MT458C – 58HP

*Exact model shown in 360° view may vary

Features

INDEPENDENT PTO

Easiest PTO to operate that can be turned on or off with a switch.

DUAL PEDAL 3 RANGE HST

Easier and more comfortable than rocker pedals.

STANDARD FULLY SYNCHRONIZED TRANSMISSION & 16×16 SYNCHRO SHUTTLE

Change gears without having to stop. 16 forward / 16 reverse gear transmission provides more operating speeds than others in its class for superior control, precision and safe operations for virtually any application.

STANDARD 2 SETS OF REMOTE VALVES WITH DETENT

Adds functionality and improves ease of use by allowing attachment of hydraulically controlled implements without the high, additional costs like others in its class to add the remotes as options.

EXTENDABLE LOWER LINKS

Category 2 with hitch lift capacity of 4,079 lbs. allows easier attachment of a wide variety of implements.

STANDARD TILT & POWER STEERING

Makes turning easier, improves control and reduces fatigue.

FENDER MOUNTED JOYSTICK FOR FRONT END LOADER

Easily accessible for maximum comfort and convenience.

YOUR CHOICE OF TIRES AT NO ADDITIONAL COST*

Choose Ag, Industrial or Turf tires at no additional cost. *Subject to dealer inventory.

3-POINT HITCH

Category 3 with hitch lift capacity of 4,079 lbs. allows easier attachment of a wide variety of implements.

STANDARD REAR WORK LIGHT

Adjustable light to improve visibility where you need it.

7 PIN CONNECTOR

Provides electrical power for implements when needed.

STANDARD DRAW BAR

Increases the usefulness of the tractor without the additional optional cost.

LARGE FUEL TANK

Provides long operation times between fill-ups.

FLAT PLATFORM AND RUBBER MAT

Roomy, spacious and comfortable.

LS CRDI TIER 4 ENGINE

Generates more power with less noise, fuel consumption, vibration and emissions. Standard preheat starting aid helps starting in cold weather. Includes engine speed cruise control.

DELUXE ADJUSTABLE SEAT WITH ARM RESTS AND RETRACTABLE SEAT BELT

Keeps you in a comfortable and safe position for maximum control.

SPECIFICATIONS

ENGINE

  • Type: Vertical Water-Cooled 4Cycle Diesel Engine
  • Model (Tier 4): L4C25-T
  • Engine HP (Gross): 58
  • PTO HP: 51.2
  • Rated Speed (RPM): 2,500
  • Displacement (cu. in): 152.8
  • Fuel Tank Capacity (gal): 21.1
  • Alternator(V-A): 12 – 70

DRIVE TRAIN

  • Transmission: Synchro Shuttle / Power Shuttle
  • No. of Speed: F16 x R16
  • Brakes: Wet, Multi Disc
  • Steering: Hydrostatic Power Steering

PTO

  • Type: Independent
  • Rear, rpm: 540

HYDRAULIC SYSTEM

  • Control System: Position/Draft
  • Implement pump (gpm): 9.9
  • Steering pump (gpm): 4.6
  • Total flow (gpm): 14.5
  • Category, 3 pt hitch: CAT II
  • Hitch Lift capacity, lbs(Hitch end): 4,079
  • Remote Valves: 2 pairs (Front), 2/3 pairs (Rear)

DIMENSION

  • Overall length with 3pt (in.): 138.6
  • Wheelbase (in.): 80.3
  • Min. overall width with Ag tires (in.): 70
  • Height to top of Cab with Ag tires (in.): 103

TIRE SIZE

  • Ag Front/Rear: 9.5 – 20 / 16.9 – 24
  • Industrial Front/Rear: 10.5/80 – 18 / 19.5L – 24
  • Turf Front/Rear: 36 x 13.5 – 15 / 16.9 – 24

WEIGHT

  • Total weight without ballast (lbs.): 4,674

OPTIONS

Auxiliary fuel tank-additional 5.3 gal
Front weight Kit-44 lbs x 44
Down swept exhaust

ATTACHMENTS

FRONT LOADER – LL5106

  • Bucker Size (in): 78
  • Maximum Lift height (in): 116.3
  • Clearance with Attachment Dump (in): 84.7
  • Reach at Maximum Height (in): 6.6
  • Maximum Dump Angle (deg.) 71
  • Maximum Rollback Angle (deg.): 48
  • Digging Depth (in): 4.1
  • Overall Height in Carry Position (in): 67.6
  • Lift Capacity(@ Pivot pin) (lbs.) 2,739
  • Breakout Force(@ Pivot pin) (lbs.): 4,556
  • Approx. Weight(Loader w/o Bucket), lbs.: 1,014
See Attachment

BACKHOE – LB3102

  • Digging Depth (in): 94.4
  • Reach from centerline of swing Pivot (in): 136.1
  • Loading Height (in): 80.3
  • Swing Arc (deg.): 180
  • Transport Height (in): 92.9
  • Bucket Rotating (deg.): 180
  • Stabilizer Spread(Down position) (in): 68.7
  • Stabilizer Spread(Up position) (in): 46.4
  • Bucket Digging force (lbs): 3,748
See Attachment